Envíos a toda ColombiaCompra segura y protegidaFacturación electrónicaAsesoría especializada
Energía y servicios públicos · caso documentado

Telemetría SCADA para servicios públicos con TRB246

Gateways TRB246 conectan PLC distribuidos con el sistema SCADA de la sede de SEWA y transportan comunicación industrial por redes móviles.

TRB246
Imagen del caso Teltonika Networks: Telemetría SCADA para servicios públicos con TRB246
Imagen del caso publicado por Teltonika Networks
SectorEnergía y servicios públicos
Proyecto / integradorAvanceon y Sharjah Electricity, Water & Gas Authority (SEWA)
Equipo documentadoTRB246
Referencia originalTeltonika Networks
Esquema técnico del caso

Topología de la solución

El diagrama original muestra los equipos y enlaces que componen esta aplicación. Amplíalo para revisar sus conexiones.

Topología Teltonika del sistema SCADA de SEWA: TRB246 en la sede y sitios remotos enlaza PLC por APN celular.Ampliar diagrama
Topología Teltonika del sistema SCADA de SEWA: TRB246 en la sede y sitios remotos enlaza PLC por APN celular. Fuente: IoT Gateway for Utilities SCADA System in Sharjah, the UAE · Teltonika Networks
Recorrido de datos

Sistema SCADA de SEWA ↔ TRB246 central ↔ APN celular/M2M ↔ TRB246 remoto ↔ PLC de electricidad, agua o gas por Ethernet/DNP3.

El reto operativo

Qué necesitaba resolver el proyecto

SEWA necesitaba llegar desde su centro de control a PLC de electricidad, agua y gas distribuidos en Sharjah. La arquitectura requería mantener el protocolo DNP3, dirigir tráfico hacia los equipos y usar SIM con APN para los enlaces M2M.

La solución conectada

Cómo se integran los equipos

Avanceon seleccionó el TRB246 como gateway industrial en la sede SCADA y en los sitios con PLC. Los equipos se enlazan por sus puertos Ethernet y el gateway facilita la comunicación redirigida entre el centro y los controladores, con conectividad LTE Cat 4, doble SIM, conmutación automática y soporte para DNP3.

Desglose de arquitectura

Así trabaja cada parte de la red

La implementación debe seguir las interfaces y protocolos descritos en la ficha del producto y en la documentación de los equipos conectados.

  1. 01

    El sistema SCADA de la sede inicia o recibe consultas de los controladores remotos.

  2. 02

    Un TRB246 conecta el sistema central y otro se instala en cada sitio con PLC.

  3. 03

    La red celular con APN transporta el tráfico M2M y el gateway enruta la comunicación necesaria.

  4. 04

    DNP3 y las reglas de acceso se configuran con el integrador y el operador de la red.

Dónde aplica

Aplicaciones de esta arquitectura

  • Sistemas SCADA de empresas de servicios
  • Telemetría de PLC distribuidos
  • Comunicación M2M sobre APN celular
Antes de diseñar

Puntos técnicos que debes validar

La topología es una referencia. La selección final depende de las condiciones del sitio y los equipos reales.

  • Alinear topología IP, APN, direccionamiento y puertos con el operador móvil.
  • Verificar DNP3 y las funciones de port forwarding requeridas por el SCADA.
  • Definir separación entre red de control y redes administrativas.
  • Probar failover de SIM y accesos desde centro de control antes de operación.
Resultados esperados

Qué habilita esta conectividad

01

Comunicación entre SCADA central y PLC de campo.

02

Alternativa celular para estaciones distribuidas.

03

Redundancia de enlace mediante doble SIM y conmutación configurada.

Ver contenido original de Teltonika Networks (inglés)

Highlights

✔ Avanceon is an automation and control engineering solution provider operating from Dubai and Abu Dhabi to service 16 industrial and manufacturing market segments, including energy and utilities, critical infrastructure, and transportation.

✔ Its client, the Sharjah Electricity, Water & Gas Authority, has a SCADA system that includes APN SIM cards. These bolster the system’s security but present some M2M communication challenges, necessitating an IoT gateway that supports the DNP3 protocol and is capable of port forwarding.

✔ The device chosen is our TRB246 IoT gateway, enabling this remote management solution by providing robust serial communication support and reliable LTE Cat 4 connectivity.

The challenge – the complexities of SCADA communication

Supervisory control and data acquisition (SCADA) systems are an integral part of the telemetry and utilities sector. SCADA systems enable both private companies and governmental authorities to remotely manage and control PLCs, collect usage data of utilities such as electricity, water, and gas, and perform tasks such as pump activation or valve closing.

Our partner, Avanceon, was helping the Sharjah Electricity, Water & Gas Authority (SEWA) in the UAE to establish smooth connectivity and implement a SCADA system for the energy and utilities critical infrastructure in the city of Sharjah. When it came to choosing the networking device, however, this solution’s criteria presented a challenge.

SEWA needed the chosen networking device to include private Access Point Name (APN) SIM cards. This inclusion would bypass the security risk of using a regular SIM card and have its data transmitted publicly over the cloud.

However, private APN SIM cards make remote management and control of the PLCs difficult. They demand port forwarding to be used, directing M2M communication to a designated TCP port number supported by the SCADA system. In other words, an IoT gateway that could enable this redirection was needed.

The solution – port forwarding IoT gateway

Avanceon chose the Teltonika Networks TRB246 industrial IoT gateway to facilitate redirected M2M communication in SEWA’s SCADA system.

On one end of the system, the device is connected to the SCADA computer system in SEWA’s headquarters in Sharjah. On the other end, for every PLC distributed in Sharjah and connected to this SCADA system, a TRB246 IoT gateway is installed as well. The connection on both ends is done via the IoT gateway’s RJ45 port.

The complexity of this solution is not in its physical setup – it’s in the architecture of its M2M communication. The PLC monitors the myriad of telemetry data, such as water pressure in pipes, gas flow, and electricity usage, and transmits it wirelessly to the remote SCADA system.

This transmission is carried out via port forwarding: redirecting and forwarding the communication request from the PLC to a designated port number supported by the SCADA system: the TCP port 20000. This facilitates secure and effective communication via the DNP3 protocol.

The SCADA system then analyses the telemetry data and can perform remote troubleshooting of any end equipment connected to the PLC. This minimises downtime and eliminates the need for engineers to travel for manual troubleshooting – resulting in an impeccably-automated remote system without sacrificing security.

Port forwarding and support of the DNP3 protocol are the main features needed in this case, but the TRB246 has plenty more to offer. This industrial IoT gateway provides reliable LTE Cat 4 connectivity with dual SIM functionality, auto-failover, backup WAN, and more switching scenarios for maximum connection reliability.

Apart from the DNP3 protocol, the TRB246 also supports Modbus TCP, Modbus RTU, DLMS, and many other communication protocols. In terms of interfaces, it is equipped with the aforementioned RJ45 port, as well as I/Os and 16-pin terminal block RS232 port and RS485 port.

Housed in durable aluminium housing with DIN rail mountain options and capable of withstanding temperatures ranging from -40 °C to 75 °C, this IoT gateway can handle any industrial environment the PLCs are installed in.

When it comes to connection reliability and architecture versatility, the TRB246 is the perfect choice for SCADA systems managing critical infrastructure and telemetry.

Distribuidor oficial en Colombia

Aplicación potencial en Colombia

Esta referencia internacional puede orientar una evaluación para energía y servicios públicos en Colombia. La publicación original describe el proyecto en su contexto; cualquier adaptación local debe validar cobertura, interfaces, seguridad y condiciones del sitio.

Implementación y compatibilidad

Preguntas frecuentes

Valida el modelo exacto, las interfaces y las condiciones de cobertura antes de llevar el diseño a campo.

¿Qué equipos Teltonika aparecen en este caso?

La referencia documentada incluye TRB246. La selección final debe considerar modelo, interfaces, cobertura, firmware y disponibilidad local.

¿Cómo se transmiten los datos de la aplicación?

Sistema SCADA de SEWA ↔ TRB246 central ↔ APN celular/M2M ↔ TRB246 remoto ↔ PLC de electricidad, agua o gas por Ethernet/DNP3.

¿Qué se debe revisar antes de implementar una solución similar?

Alinear topología IP, APN, direccionamiento y puertos con el operador móvil. Verificar DNP3 y las funciones de port forwarding requeridas por el SCADA. Definir separación entre red de control y redes administrativas.

Distribuidores oficiales en Colombia

Revisemos tu topología y los equipos que necesitas conectar.

Compártenos el modelo de tus equipos, las interfaces, la ubicación y el tipo de conexión disponible. Un asesor de OptimusTech puede ayudarte a evaluar la referencia Teltonika adecuada.

Solicitar asesoría
Adaptación en español de la referencia publicada por Teltonika Networks: IoT Gateway for Utilities SCADA System in Sharjah, the UAE. Diagrama y material visual atribuidos a Teltonika Networks. La página no implica que OptimusTech haya ejecutado el proyecto original.